|
|
|
|
|
1
-
FIXTURES LED CONTROL…
FIXTURES LED CONTROLLER FOR FILM AND TV
September 1, 2023 @ 9:00 am - 4:00 pm
● Who should take this class?
○ Members wanting to learn about the different devices used to dim and control
LED ribbon and LED cards on film and TV sets.
● What will students learn from this class?
○ About PWM and PWM Frequencies
○ Bit Rates
○ Gamma Curves
○ DMX Address vs Fixtures Address
○ Connecting Power Supplies to LED Controllers
○ Get Familiar with the different menu’s on Sunricher, LTech, and Litegear
controllers
○ Wiring up LEDs to the different LED controllers
○ Mounting LED Controllers and Power Supplies to Set Walls
○ How to use an RC4 and using a DMX Cat to operate the RC4
○ Operating Small Incandescents
○ Operating Small Motors
○ How to use a Swisson
○ How to use a DMX Cat
There are 30 seats available for this class
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick,
Local 479 Director of Education and Training
See more details
-
Skylight Balloon Tec…
Skylight Balloon Tech Grip Clouds with Marc Shearer Day 3
September 1, 2023 @ 10:00 am - 5:00 pm
Wavelength Lighting, 1554 Litton Dr, Stone Mountain, GA 30083, USA
This class will be held at Wavelength Lighting located at 1554 Litton Dr, Stone Mountain, GA 30083, USA
This three-part course covers the fundamentals of balloon light/gripcloud construction, operation, and disassembly.
Participants will learn how to safely build, operate, and disassemble lighting balloons and grip clouds of various designs, with the simpler balloons covered on day 1 (101), more complex balloons on day 2(201), and grip clouds on day 3 (202).
Having attended the 101-201 course is preferred to attend the 202 Grip Clouds.
There are 30 total seats for this class.
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick, Local 479 Director of Education and Training
See more details
• •
|
|
|
|
5
|
6
-
Heartsaver CPR with …
Heartsaver CPR with Sarah Mullis
September 6, 2023 @ 9:00 am - 2:30 pm
IATSE local 479, 4220 International Pkwy Suite 100, Atlanta, GA 30354, USA
This American Heart Association Heartsaver CPR and AED course was the first in the nation to combine hands-on AED instruction with CPR training. The course teaches the basic techniques of adult, child, and infant CPR and use of an AED.
Students also learn to use barrier devices in CPR and give first aid for choking in the responsive victim. The course teaches how to recognize the signs of three major emergencies: heart attack, stroke, and choking.
See more details
-
Intro to Costume Alt…
Intro to Costume Alterations - Shirts with Lindsey Long Day 1
September 6, 2023 @ 9:00 am - 3:30 pm
Intro to Costume Alterations - Shirts
Day 1 - Shirt Alterations
- Hems
- Darts
- Sleeve adjustments
- Moving cuffs
- Slimming the shirt
- Tshirt alterations
Bring your kit if you have one, limited sewing machines available to be reserved on a first come first served basis
There are 20 seats available for this class
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick,
Local 479 Director of Education and Training
See more details
• •
|
7
-
Intro to Costume Alt…
Intro to Costume Alterations - Jackets with Lindsey Long Day 1
September 7, 2023 @ 9:00 am - 3:30 pm
Intro to Costume Alterations - Jackets
Day 2
- Suit jacket alterations
- Rental alterations
- Dress alterations
- Skirt alterations
Bring your kit if you have one, limited sewing machines available to be reserved on a first come first served basis
There are 20 seats available for this class
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick,
Local 479 Director of Education and Training
See more details
-
MEWP Training - Loca…
MEWP Training - Local 479 Training Center
September 7, 2023 @ 9:00 am - 2:00 pm
IATSE local 479, 4220 International Pkwy Suite 100, Atlanta, GA 30354, USA
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
This training prepares an individual to understand the hazards involved in operating specific equipment. Course includes in-classroom and hands-on training for Mobile Elevated Work Platforms.
There are 20 seats available for this class
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick,
Local 479 Director of Education and Training
See more details
• •
|
8
-
FORKLIFT Training - …
FORKLIFT Training - Local 479 Education Classroom A
September 8, 2023 @ 9:00 am - 2:00 pm
IATSE local 479, 4220 International Pkwy Suite 100, Atlanta, GA 30354, USA
This training prepares an individual to understand the hazards involved in operating specific equipment. Course includes in-classroom and hands-on training for Forklifts.
- Responsibilities as a user and operator
- Conducting a pre-start inspection
- Conducting a workplace inspection
- Various types of equipment
- Preventing accidents and identifying hazards in operation
- Teaching materials:
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick,
Local 479 Director of Education and Training
See more details
•
|
9
|
10
|
11
|
12
-
Fixtures 101 with Jo…
Fixtures 101 with Joshua Earles-Bennett
September 12, 2023 @ 9:00 am - 3:30 pm
IATSE local 479, 4220 International Pkwy Suite 100, Atlanta, GA 30354, USA
Who should take this class?
Anyone looking to transition into the Fixtures Dept. or to learn best practices when handling fixtures on set
What should the students learn from this class?
Proper habits and techniques for installing and wiring set fixtures
What does the Fixtures Dept. do?
Good Habits in Fixtures Test Label Ask Questions
Get into the Hands On Part of the Training
How to Use a Multimeter AC Testing DC Testing Continuity Testing Splicing and Crimping Wires How to splice with wire nuts How to splice with Wagos and Lever Nuts How to use Crimp Connectors How to splice using the soldering method Hot - Neutral - Ground How to identify them Wiring Up some Outlets Proper way to do it Tips for when outlets are installed Let's make a jumper stinger Make jumper stinger and test with Multimeter Let's wire an installed fixture Strain Relief Making clean runs Label Show how to properly open a bag of zip ties Let's use some add-a-taps and quick-ons Let's Solder and Make Some LED Panels Solder Tips Solder Wire Using Flux Bussing Across LED Strips Adding a Tail Velcro the edges
To attend the Fixtures 101 workshop, please send an email to [email protected]
Thank you,
Kevin Amick Local 479 Director of Education and Training
See more details
-
Heartsaver CPR with …
Heartsaver CPR with Sarah Mullis
September 12, 2023 @ 9:00 am - 2:30 pm
IATSE local 479, 4220 International Pkwy Suite 100, Atlanta, GA 30354, USA
This American Heart Association Heartsaver CPR and AED course was the first in the nation to combine hands-on AED instruction with CPR training. The course teaches the basic techniques of adult, child, and infant CPR and use of an AED.
Students also learn to use barrier devices in CPR and give first aid for choking in the responsive victim. The course teaches how to recognize the signs of three major emergencies: heart attack, stroke, and choking.
See more details
-
Introduction to Wire…
Introduction to Wireless DMX - Protocols and Training with Jim Dornemann and Matt Klann Day 1
September 12, 2023 @ 9:00 am - 4:00 pm
640 Airport S Pkwy, Atlanta, GA 30349, USA
In Modern film sets we are seeing extensive use of wireless communications and protocols. It has become increasingly necessary for success that programmers and technicians be able to handle the system architecture of wireless networks to succeed in the complicated technical environments. Advanced wireless covers the basics of CRMX and Streaming Architectural Control Networks and teaches students hands on how to use the equipment necessary to create and maintain these networks.
Some of the main topics covered are:
What is CRMX
What is sACN and Art-NET
What Equipment is needed to create these networks
How can we make these networks stable and “bullet proof”
What tools should I have as a technician
What do I do if the network stops working (Troubleshooting)
Hard-Lining DMX vs using Wireless, when to use each.
This course is a direct hands on experience of learning the skills needed to setup and maintain advanced wireless networks. The goal of the class is to teach students everything they need to know to succeed as the administrator of advanced wireless networks, and also gives students a taste of the pressure that technicians experience on a typical filming day.
To request attendance to this workshop, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick, Local 479 Director of Education and Training
See more details
-
The role of the ACD …
The role of the ACD with Summer Tinch
September 12, 2023 @ 9:00 am - 3:30 pm
The Assistant Designer Workshop will cover the following topics:
1-We will cover the duties and responsibilities of an ACD
2- Methods of accurate research & understanding period research
3- Creating digital research boards using Google Sheets or Canva
4- Schedules of productions
5- Timely Shopping, building, alterations
6-Working with the shoppers
7- Pcard purchases
8- Taking detailed notes and being organized
5- How to prep for and conduct fittings (pulling character closets)
6- How to help establish
7- Meetings & more
Students are highly encouraged to bring their laptops and have access to online software like Google Sheets and or Canva
There are 30 available spots for this workshop.
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick, Local 479 Director of Education and Training
See more details
-
The Dolly Grip with …
The Dolly Grip with Darryl Humber
September 12, 2023 @ 10:00 am - 5:00 pm
IATSE local 479, 4220 International Pkwy, Atlanta, GA 30354, USA
The dolly class will touch on basic dolly grip functions and responsibilities including track laying, dance floor shots, compound moves, and different setup scenarios.
See more details
• • • • •
|
13
-
Fixtures 101 with Jo…
Fixtures 101 with Joshua Earles-Bennett
September 13, 2023 @ 9:00 am - 3:30 pm
IATSE local 479, 4220 International Pkwy Suite 100, Atlanta, GA 30354, USA
Who should take this class?
Anyone looking to transition into the Fixtures Dept. or to learn best practices when handling fixtures on set
What should the students learn from this class?
Proper habits and techniques for installing and wiring set fixtures
What does the Fixtures Dept. do?
Good Habits in Fixtures Test Label Ask Questions
Get into the Hands On Part of the Training
How to Use a Multimeter AC Testing DC Testing Continuity Testing Splicing and Crimping Wires How to splice with wire nuts How to splice with Wagos and Lever Nuts How to use Crimp Connectors How to splice using the soldering method Hot - Neutral - Ground How to identify them Wiring Up some Outlets Proper way to do it Tips for when outlets are installed Let's make a jumper stinger Make jumper stinger and test with Multimeter Let's wire an installed fixture Strain Relief Making clean runs Label Show how to properly open a bag of zip ties Let's use some add-a-taps and quick-ons Let's Solder and Make Some LED Panels Solder Tips Solder Wire Using Flux Bussing Across LED Strips Adding a Tail Velcro the edges
To attend the Fixtures 101 workshop, please send an email to [email protected]
Thank you,
Kevin Amick Local 479 Director of Education and Training
See more details
-
Introduction to Wire…
Introduction to Wireless DMX - Protocols and Training with Jim Dornemann and Matt Klann Day 2
September 13, 2023 @ 9:00 am - 4:00 pm
640 Airport S Pkwy, Atlanta, GA 30349, USA
In Modern film sets we are seeing extensive use of wireless communications and protocols. It has become increasingly necessary for success that programmers and technicians be able to handle the system architecture of wireless networks to succeed in the complicated technical environments. Advanced wireless covers the basics of CRMX and Streaming Architectural Control Networks and teaches students hands on how to use the equipment necessary to create and maintain these networks.
Some of the main topics covered are:
What is CRMX
What is sACN and Art-NET
What Equipment is needed to create these networks
How can we make these networks stable and “bullet proof”
What tools should I have as a technician
What do I do if the network stops working (Troubleshooting)
Hard-Lining DMX vs using Wireless, when to use each.
This course is a direct hands on experience of learning the skills needed to setup and maintain advanced wireless networks. The goal of the class is to teach students everything they need to know to succeed as the administrator of advanced wireless networks, and also gives students a taste of the pressure that technicians experience on a typical filming day.
To request attendance to this workshop, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick, Local 479 Director of Education and Training
See more details
-
Technocrane Operatio…
Technocrane Operations and Safety with Darryl Humber
September 13, 2023 @ 10:00 am - 5:00 pm
2000 McFarland 400 Blvd, Alpharetta, GA 30004, USA
The Technocrane class will focus on crane safety, communication, repeating moves, working with a pickle operator, finding sightlines and basic crane operation.
See more details
• • •
|
14
-
MEWP Training - Loca…
MEWP Training - Local 479 Training Center
September 14, 2023 @ 9:00 am - 2:00 pm
IATSE local 479, 4220 International Pkwy Suite 100, Atlanta, GA 30354, USA
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
This training prepares an individual to understand the hazards involved in operating specific equipment. Course includes in-classroom and hands-on training for Mobile Elevated Work Platforms.
There are 20 seats available for this class
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick,
Local 479 Director of Education and Training
See more details
-
Understanding Backgr…
Understanding Background Fittings with Summer Tinch
September 14, 2023 @ 9:00 am - 3:30 pm
The Background Fitter Workshop will cover the following topics:
1. The purpose of background
2. The importance of getting any notes on creating a background character
3- Utilizing any reference photos when creating characters
4- The importance of skins, BG breakdown, call sheet, and the one-liner
5- Pre-fit background vs. background fit on the day
6- How to pull the appropriate stock for fittings
7- How to set up and conduct BG fittings
6. The importance of pre-fitting BG on period shows
7- Taking approval photos
8- How to recycle background
There are 30 available spots for this workshop.
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick, Local 479 Director of Education and Training
See more details
• •
|
15
|
16
|
17
|
18
-
Introduction to LED …
Introduction to LED Video Walls for Technicians with Jason Clairy and Curtis Luxton Day 1
September 18, 2023 @ 10:00 am - 4:00 pm
640 Airport S Pkwy, Atlanta, GA 30349, USA
This workshop will be at the Lightscape Lighting/Ratpac Controls facility located at 640 Airport S Pkwy, Atlanta, GA 30349, USA.
Introduction to LED Video Walls for Technicians is a two day workshop with Jason Clairy and Curtis Luxton.
Introduction to LED Video Walls for Technicians teaches students to understand how to use Media Servers and Video Walls for Television Shows and Feature Films. The class breaks the subject into a manageable progression of skills, starting with the basics of connecting to the existing video wall system, integrating the Lighting Console with the selected media server, programming content and layers, and integrating the video layers in to the lighting environments of the set. Upon completion of the class, students will have the familiarity and experience needed to run car process and media servers in a professional environment. All materials and equipment are the same equipment used on professional sets.
Some of the main topics covered are:
Understanding the basics of how video wall systems operate.
Integrating the lighting console with the media server and the video wall system
Understanding media content understanding layers
Programming the media server though the lighting console
Typical environments (Car Process vs Green Screen style setups) integrating video with lighting
Troubleshooting
Helping prepare students for the Reality of shooting on set, vs. the safer space of training in the classroom.
The class has three tests, where students can demonstrate their understanding of the class materials.
This course is a direct hands on experience of learning the skills needed to control video walls and media servers on a film set, taught by experienced professionals, and culminating in realistic live exercises.
There are 20 seats available for this class
To request attendance to this workshop, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick, Local 479 Director of Education and Training
See more details
•
|
19
-
Heartsaver CPR with …
Heartsaver CPR with Sarah Mullis
September 19, 2023 @ 9:00 am - 2:30 pm
IATSE local 479, 4220 International Pkwy Suite 100, Atlanta, GA 30354, USA
This American Heart Association Heartsaver CPR and AED course was the first in the nation to combine hands-on AED instruction with CPR training. The course teaches the basic techniques of adult, child, and infant CPR and use of an AED.
Students also learn to use barrier devices in CPR and give first aid for choking in the responsive victim. The course teaches how to recognize the signs of three major emergencies: heart attack, stroke, and choking.
See more details
-
LED Ribbon Soldering…
LED Ribbon Soldering Workshop with Aaron Bennett - Justin White
September 19, 2023 @ 9:00 am - 2:00 pm
IATSE local 479, 4220 International Pkwy Suite 100, Atlanta, GA 30354, USA
Learn the basics of adding tails, scabbing, and bussing LED ribbon taught by Joshua Earles-Bennett and Aaron Bennett. This workshop is for anyone looking to learn how LED Ribbon is soldered.
Topics to be covered in this workshop:
○ How to add tails to LED ribbon
○ How to scab two pieces of LED ribbon together
○ How to buss LED ribbon
○ Tinning
○ Best practices for soldering
○ How to use a soldering iron
There are 30 available spots for this workshop.
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick, Local 479 Director of Education and Training
See more details
-
Introduction to LED …
Introduction to LED Video Walls for Technicians with Jason Clairy and Curtis Luxton Day 1
September 19, 2023 @ 10:00 am - 4:00 pm
640 Airport S Pkwy, Atlanta, GA 30349, USA
This workshop will be at the Lightscape Lighting/Ratpac Controls facility located at 640 Airport S Pkwy, Atlanta, GA 30349, USA.
Introduction to LED Video Walls for Technicians is a two day workshop with Jason Clairy and Curtis Luxton.
Introduction to LED Video Walls for Technicians teaches students to understand how to use Media Servers and Video Walls for Television Shows and Feature Films. The class breaks the subject into a manageable progression of skills, starting with the basics of connecting to the existing video wall system, integrating the Lighting Console with the selected media server, programming content and layers, and integrating the video layers in to the lighting environments of the set. Upon completion of the class, students will have the familiarity and experience needed to run car process and media servers in a professional environment. All materials and equipment are the same equipment used on professional sets.
Some of the main topics covered are:
Understanding the basics of how video wall systems operate.
Integrating the lighting console with the media server and the video wall system
Understanding media content understanding layers
Programming the media server though the lighting console
Typical environments (Car Process vs Green Screen style setups) integrating video with lighting
Troubleshooting
Helping prepare students for the Reality of shooting on set, vs. the safer space of training in the classroom.
The class has three tests, where students can demonstrate their understanding of the class materials.
This course is a direct hands on experience of learning the skills needed to control video walls and media servers on a film set, taught by experienced professionals, and culminating in realistic live exercises.
There are 20 seats available for this class
To request attendance to this workshop, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick, Local 479 Director of Education and Training
See more details
• • •
|
20
-
HOG 4 Console Traini…
HOG 4 Console Training with Jason Clairy Day 1
September 20, 2023 @ 9:00 am - 5:00 pm
640 Airport S Pkwy, Atlanta, GA 30349, USA
This class is the official ETC approved curriculum for training on theHog Series of Live Event family of lighting control consoles.
This class has a hard limit of 8 students,
Some of the main topics covered are:
o Console Configuration
o DMX fixture Patching and grouping
o Network DMX Protocol output configuration (sACN,Artnet)
o Attribute palette and configuration
o Methods and theory of color mixing
o Building and Modification of Lighting Cues
o Pixel Mapping Basicsand introduction
o Console FX engine introduction
o Console workflow and proper command syntax
o What do I do if the console stops working (Troubleshooting)
There are only 8 seats available for this class and will be on a first come first served basis.
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick,
Local 479 Director of Education and Training
See more details
-
Intro to Costume Alt…
Intro to Costume Alterations with Lindsey Long Day 1
September 20, 2023 @ 9:00 am - 3:30 pm
Intro to Costume Alterations
Day 1 - Learn about the basic tools, terms, and techniques of sewing & fitting
- Fitting etiquette
- How to write an alterations tag
- How to pin for fittings
- How to take measurements
- Tools for cutting & measuring, pins & needles
- Tools for pressing (ironing)
- Get familiar with fabric
- Learn different hand stitches
- Learn all the features of a sewing machine
Bring your kit if you have one, limited sewing machines available to be reserved on a first come first served basis
There are 20 seats available for this class
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick,
Local 479 Director of Education and Training
See more details
-
LED Ribbon Soldering…
LED Ribbon Soldering Workshop with Aaron Bennett - Justin White
September 20, 2023 @ 9:00 am - 2:00 pm
IATSE local 479, 4220 International Pkwy Suite 100, Atlanta, GA 30354, USA
Learn the basics of adding tails, scabbing, and bussing LED ribbon taught by Joshua Earles-Bennett and Aaron Bennett. This workshop is for anyone looking to learn how LED Ribbon is soldered.
Topics to be covered in this workshop:
○ How to add tails to LED ribbon
○ How to scab two pieces of LED ribbon together
○ How to buss LED ribbon
○ Tinning
○ Best practices for soldering
○ How to use a soldering iron
There are 30 available spots for this workshop.
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick, Local 479 Director of Education and Training
See more details
• • •
|
21
-
HOG 4 Console Traini…
HOG 4 Console Training with Jason Clairy Day 2
September 21, 2023 @ 9:00 am - 5:00 pm
640 Airport S Pkwy, Atlanta, GA 30349, USA
This class is the official ETC approved curriculum for training on theHog Series of Live Event family of lighting control consoles.
This class has a hard limit of 8 students,
Some of the main topics covered are:
o Console Configuration
o DMX fixture Patching and grouping
o Network DMX Protocol output configuration (sACN,Artnet)
o Attribute palette and configuration
o Methods and theory of color mixing
o Building and Modification of Lighting Cues
o Pixel Mapping Basicsand introduction
o Console FX engine introduction
o Console workflow and proper command syntax
o What do I do if the console stops working (Troubleshooting)
There are only 8 seats available for this class and will be on a first come first served basis.
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick,
Local 479 Director of Education and Training
See more details
-
Intro to Costume Alt…
Intro to Costume Alterations - Pants with Lindsey Long Day 2
September 21, 2023 @ 9:00 am - 3:30 pm
Intro to Costume Alterations - Pants
Day 2 - Pants Alterations
- Different types of hems
- Slimming the legs
- Taking in and adding to the waist
- Shortening pockets
- Removing belt loops
- Adjusting the rise
Bring your kit if you have one, limited sewing machines available to be reserved on a first come first served basis
There are 20 seats available for this class
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick,
Local 479 Director of Education and Training
See more details
-
MEWP Training - Loca…
MEWP Training - Local 479 Training Center
September 21, 2023 @ 9:00 am - 2:00 pm
IATSE local 479, 4220 International Pkwy Suite 100, Atlanta, GA 30354, USA
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
This training prepares an individual to understand the hazards involved in operating specific equipment. Course includes in-classroom and hands-on training for Mobile Elevated Work Platforms.
There are 20 seats available for this class
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick,
Local 479 Director of Education and Training
See more details
• • •
|
22
-
FORKLIFT Training - …
FORKLIFT Training - Local 479 Education Classroom A
September 22, 2023 @ 9:00 am - 2:00 pm
IATSE local 479, 4220 International Pkwy Suite 100, Atlanta, GA 30354, USA
This training prepares an individual to understand the hazards involved in operating specific equipment. Course includes in-classroom and hands-on training for Forklifts.
- Responsibilities as a user and operator
- Conducting a pre-start inspection
- Conducting a workplace inspection
- Various types of equipment
- Preventing accidents and identifying hazards in operation
- Teaching materials:
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick,
Local 479 Director of Education and Training
See more details
•
|
23
-
FORKLIFT Training - …
FORKLIFT Training - Local 479 Education Classroom A
September 23, 2023 @ 10:00 am - 5:00 pm
IATSE local 479, 4220 International Pkwy Suite 100, Atlanta, GA 30354, USA
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
This training prepares an individual to understand the hazards involved in operating specific equipment. Course includes in-classroom and hands-on training for Forklifts.
- Responsibilities as a user and operator
- Conducting a pre-start inspection
- Conducting a workplace inspection
- Various types of equipment
- Preventing accidents and identifying hazards in operation
- Teaching materials:
- Safety guidelines booklet
- Course completion wallet card
There are 20 seats available for this class
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick,
Local 479 Director of Education and Training
See more details
-
FORKLIFT Training - …
FORKLIFT Training - Local 479 Education Workshop 1
September 23, 2023 @ 10:00 am - 5:00 pm
IATSE local 479, 4220 International Pkwy Suite 100, Atlanta, GA 30354, USA
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
This training prepares an individual to understand the hazards involved in operating specific equipment. Course includes in-classroom and hands-on training for Forklifts.
- Responsibilities as a user and operator
- Conducting a pre-start inspection
- Conducting a workplace inspection
- Various types of equipment
- Preventing accidents and identifying hazards in operation
- Teaching materials:
- Safety guidelines booklet
- Course completion wallet card
There are 20 seats available for this class
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick,
Local 479 Director of Education and Training
See more details
• •
|
24
|
25
|
26
-
FIXTURES LED CONTROL…
FIXTURES LED CONTROLLER FOR FILM AND TV PREP
September 26, 2023 @ 9:00 am - 4:00 pm
● Who should take this class?
○ Members wanting to learn about the different devices used to dim and control
LED ribbon and LED cards on film and TV sets.
● What will students learn from this class?
○ About PWM and PWM Frequencies
○ Bit Rates
○ Gamma Curves
○ DMX Address vs Fixtures Address
○ Connecting Power Supplies to LED Controllers
○ Get Familiar with the different menu’s on Sunricher, LTech, and Litegear
controllers
○ Wiring up LEDs to the different LED controllers
○ Mounting LED Controllers and Power Supplies to Set Walls
○ How to use an RC4 and using a DMX Cat to operate the RC4
○ Operating Small Incandescents
○ Operating Small Motors
○ How to use a Swisson
○ How to use a DMX Cat
There are 30 seats available for this class
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick,
Local 479 Director of Education and Training
See more details
-
Heartsaver CPR with …
Heartsaver CPR with Sarah Mullis
September 26, 2023 @ 9:00 am - 2:30 pm
IATSE local 479, 4220 International Pkwy Suite 100, Atlanta, GA 30354, USA
This American Heart Association Heartsaver CPR and AED course was the first in the nation to combine hands-on AED instruction with CPR training. The course teaches the basic techniques of adult, child, and infant CPR and use of an AED.
Students also learn to use barrier devices in CPR and give first aid for choking in the responsive victim. The course teaches how to recognize the signs of three major emergencies: heart attack, stroke, and choking.
See more details
-
Vectorworks 101 &…
Vectorworks 101 & 102 with Chris Cotone and James Dornemann Day 1
September 26, 2023 @ 10:00 am - 5:00 pm
IATSE local 479, 4220 International Pkwy Suite 100, Atlanta, GA 30354, USA
Spotlight Drafting is a two-session course, that teaches motion picture professionals how to use Vectorworks Spotlight to create Light Plots for film and television
What is this course about? Vectorworks Spotlight training Class (2 Day Class) teaches students to use the CAD (Computer Assisted Drafting) program Vectorworks Spotlight to make light plots and 3D Renderings of sets and lighting instruments & environments.
What will course participants learn in this course? Students will learn skills including 2D Drafting, 3D modeling and rendering, and creating draft plots of complex lighting systems. Students will also learn complex symbol creation, how to create reports and how to facilitate database maintenance.
To attend this course, please send an email to [email protected] with the course title and dates with your full legal name.
Thank you,
Kevin Amick, Local 479 Director of Education and Training
See more details
• • •
|
27
-
FIXTURES LED CONTROL…
FIXTURES LED CONTROLLER FOR FILM AND TV
September 27, 2023 @ 9:00 am - 4:00 pm
● Who should take this class?
○ Members wanting to learn about the different devices used to dim and control
LED ribbon and LED cards on film and TV sets.
● What will students learn from this class?
○ About PWM and PWM Frequencies
○ Bit Rates
○ Gamma Curves
○ DMX Address vs Fixtures Address
○ Connecting Power Supplies to LED Controllers
○ Get Familiar with the different menu’s on Sunricher, LTech, and Litegear
controllers
○ Wiring up LEDs to the different LED controllers
○ Mounting LED Controllers and Power Supplies to Set Walls
○ How to use an RC4 and using a DMX Cat to operate the RC4
○ Operating Small Incandescents
○ Operating Small Motors
○ How to use a Swisson
○ How to use a DMX Cat
There are 30 seats available for this class
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick,
Local 479 Director of Education and Training
See more details
-
Intro to Costume Alt…
Intro to Costume Alterations - Shirts with Lindsey Long Day 1
September 27, 2023 @ 9:00 am - 3:30 pm
Intro to Costume Alterations - Shirts
Day 1 - Shirt Alterations
- Hems
- Darts
- Sleeve adjustments
- Moving cuffs
- Slimming the shirt
- Tshirt alterations
Bring your kit if you have one, limited sewing machines available to be reserved on a first come first served basis
There are 20 seats available for this class
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick,
Local 479 Director of Education and Training
See more details
-
Vectorworks 101 &…
Vectorworks 101 & 102 with Chris Cotone and James Dornemann Day 2
September 27, 2023 @ 10:00 am - 5:00 pm
IATSE local 479, 4220 International Pkwy Suite 100, Atlanta, GA 30354, USA
Spotlight Drafting is a two-session course, that teaches motion picture professionals how to use Vectorworks Spotlight to create Light Plots for film and television
What is this course about? Vectorworks Spotlight training Class (2 Day Class) teaches students to use the CAD (Computer Assisted Drafting) program Vectorworks Spotlight to make light plots and 3D Renderings of sets and lighting instruments & environments.
What will course participants learn in this course? Students will learn skills including 2D Drafting, 3D modeling and rendering, and creating draft plots of complex lighting systems. Students will also learn complex symbol creation, how to create reports and how to facilitate database maintenance.
To attend this course, please send an email to [email protected] with the course title and dates with your full legal name.
Thank you,
Kevin Amick, Local 479 Director of Education and Training
See more details
• • •
|
28
-
Intro to Costume Alt…
Intro to Costume Alterations - Jackets with Lindsey Long Day 1
September 28, 2023 @ 9:00 am - 3:30 pm
Intro to Costume Alterations - Jackets
Day 2
- Suit jacket alterations
- Rental alterations
- Dress alterations
- Skirt alterations
Bring your kit if you have one, limited sewing machines available to be reserved on a first come first served basis
There are 20 seats available for this class
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick,
Local 479 Director of Education and Training
See more details
-
Intro to Set Dressin…
Intro to Set Dressing Day 1 with Jaime Rosegren and Sabastian Rennella
September 28, 2023 @ 9:00 am - 3:00 pm
IATSE local 479, 4220 International Pkwy Suite 100, Atlanta, GA 30354, USA
This 2 day Set Dressing course will consist of an introduction to the Set Decoration dept as well as beginning practical skills.
Day 1: we will go over the department, discuss different positions and their duties, common terms, and basic etiquette.
Day 2: we will work practically with tools to learn proper use of hanging items, tape usage, and basic knots.
There are 30 seats available for this class
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
KevinAmick
Director of Education IATSE Local 479 4220 International Pkwy Suite 100, Atlanta GA 30354 (470) 905-1649 Office Direct (404) 754-7751 Cell [email protected]
See more details
-
MEWP Training - Loca…
MEWP Training - Local 479 Training Center
September 28, 2023 @ 9:00 am - 2:00 pm
IATSE local 479, 4220 International Pkwy Suite 100, Atlanta, GA 30354, USA
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
This training prepares an individual to understand the hazards involved in operating specific equipment. Course includes in-classroom and hands-on training for Mobile Elevated Work Platforms.
There are 20 seats available for this class
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick,
Local 479 Director of Education and Training
See more details
• • •
|
29
-
FORKLIFT Training - …
FORKLIFT Training - Local 479 Education Classroom A
September 29, 2023 @ 9:00 am - 2:00 pm
IATSE local 479, 4220 International Pkwy Suite 100, Atlanta, GA 30354, USA
This training prepares an individual to understand the hazards involved in operating specific equipment. Course includes in-classroom and hands-on training for Forklifts.
- Responsibilities as a user and operator
- Conducting a pre-start inspection
- Conducting a workplace inspection
- Various types of equipment
- Preventing accidents and identifying hazards in operation
- Teaching materials:
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick,
Local 479 Director of Education and Training
See more details
-
Intro to Set Dressin…
Intro to Set Dressing Day 2 with Jaime Rosegren and Sabastian Rennella
September 29, 2023 @ 9:00 am - 3:00 pm
IATSE local 479, 4220 International Pkwy Suite 100, Atlanta, GA 30354, USA
This 2 day Set Dressing course will consist of an introduction to the Set Decoration dept as well as beginning practical skills.
Day 1: we will go over the department, discuss different positions and their duties, common terms, and basic etiquette.
Day 2: we will work practically with tools to learn proper use of hanging items, tape usage, and basic knots.
There are 30 seats available for this class
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
KevinAmick
Director of Education IATSE Local 479 4220 International Pkwy Suite 100, Atlanta GA 30354 (470) 905-1649 Office Direct (404) 754-7751 Cell [email protected]
See more details
• •
|
30
-
Heartsaver CPR with …
Heartsaver CPR with Sarah Mullis
September 30, 2023 @ 10:00 am - 3:30 pm
IATSE local 479, 4220 International Pkwy Suite 100, Atlanta, GA 30354, USA
This American Heart Association Heartsaver CPR and AED course was the first in the nation to combine hands-on AED instruction with CPR training. The course teaches the basic techniques of adult, child, and infant CPR and use of an AED.
Students also learn to use barrier devices in CPR and give first aid for choking in the responsive victim. The course teaches how to recognize the signs of three major emergencies: heart attack, stroke, and choking.
See more details
-
MEWP Training - Loca…
MEWP Training - Local 479 Education Classroom A
September 30, 2023 @ 10:00 am - 4:30 pm
IATSE local 479, 4220 International Pkwy Suite 100, Atlanta, GA 30354, USA
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
This training prepares an individual to understand the hazards involved in operating specific equipment. Course includes in-classroom and hands-on training for Mobile Elevated Work Platforms.
There are 20 seats available for this class
To request attendance to this course, please send an email to [email protected]. Please include your name along with Course Title and Date of the Course.
Thank you,
Kevin Amick,
Local 479 Director of Education and Training
See more details
• •
|
|
|
|
|
|
|
|